Quote:
|
Originally Posted by casper78
Thanks for all the info I hope to get the doors shaved by the first of the year. how big of a solenoid would you recommend for the back hatch. The plan is to shave the doors, the back hatch, the mirriors, and the gas cap. I am going the the commpletly naked look for showing.
|
For the rear, you may be able to utilize the existing hardware. I think the handle is electonically controller, so it must have an actuactor that opens the latches when you press the handle. If you could tap into that wiring, I think you would be set. I would recommend getting some of the spring loaded door poppers to help push the hatch out when you unlock it. Another trick option would be to put linear actuators in place of the stock gas struts that are holding up the hatch.