[Braddah Jay]

Continued again....
Now with a ratchet and 13mm socket loosen both bolts - one holds ECM and the other holds black bar.

Once bolts are removed pull ECM out of the way so you have more room to work with pulling out old cabin air inlet...


Now with that out of the way. Use a 1/4 in. ratchet w/ 10mm socket and remove nuts to cabin air assembly.


Now its gonna take a little effort to remove old piece. It's over lapped by assembly surround. Just get it past threaded bolts and it should come out.



Now its time to install new cabin filter assembly w/ filter...Make sure lower tab slides in for a good seal...