Supporting Members do not see these ads.


Page 1 of 3 1 2 3 LastLast
Results 1 to 10 of 26




  1. 11-02-2008 03:40 PM #1
    rwalshphoto
    rwalshphoto is offline
    Magnified rwalshphoto's Avatar rwalshphoto is a Magnum Genious! rwalshphoto is a Magnum Genious! rwalshphoto is a Magnum Genious! rwalshphoto is a Magnum Genious! rwalshphoto is a Magnum Genious! rwalshphoto is a Magnum Genious! rwalshphoto is a Magnum Genious! rwalshphoto is a Magnum Genious! rwalshphoto is a Magnum Genious! rwalshphoto is a Magnum Genious! rwalshphoto is a Magnum Genious!
    Join Date
    Oct 2007
    Location
    Phoenix, AZ
    Posts
    2,297
    Send a message via Yahoo to rwalshphoto

    CustomMagnums.com Thread Starter

    AEcarbon: SEMA vehicles, Recent Activities




    So we've been crazy busy over the past few months. First with our C5 Corvette and HIN followed by multiple LX vehicles and SEMA. Yesterday Nathan (Redfox) got into to pick up his parts along with parts for Plumfloored and Talon to take to SEMA. I will let Nathan jump in with the urgency of which some of these parts were frantically made and finishing touches to the car. When I left the shop today at 3pm it was heading to the detailers while we were waiting for clearcoat to cure on the Radiator cover. Here are some photos:

    REDFOX








    JetHot Sterling Ceramic Coated Valve Covers & Timing Covers, JBA Coated Shorties, Inertia Motorsport V1.1 Camshafts, Port Matched Manifold & Plenum, Ported/Polished Throttle Body, CMR Tune by Johan, Airhammer HO, Custom Catback

    CNC Inertia Performance Heads
     
  2. 11-02-2008 03:40 PM # ADS
    Advertisement
    Sponsored Advertiser
    Join Date
    Nov 2006
    Location
    Interwebz
    Posts
    Who's Counting

  3. 11-02-2008 03:40 PM #2
    rwalshphoto
    rwalshphoto is offline
    Magnified rwalshphoto's Avatar rwalshphoto is a Magnum Genious! rwalshphoto is a Magnum Genious! rwalshphoto is a Magnum Genious! rwalshphoto is a Magnum Genious! rwalshphoto is a Magnum Genious! rwalshphoto is a Magnum Genious! rwalshphoto is a Magnum Genious! rwalshphoto is a Magnum Genious! rwalshphoto is a Magnum Genious! rwalshphoto is a Magnum Genious! rwalshphoto is a Magnum Genious!
    Join Date
    Oct 2007
    Location
    Phoenix, AZ
    Posts
    2,297
    Send a message via Yahoo to rwalshphoto

    CustomMagnums.com Thread Starter










    Plumfloored:


    TALON:
    JetHot Sterling Ceramic Coated Valve Covers & Timing Covers, JBA Coated Shorties, Inertia Motorsport V1.1 Camshafts, Port Matched Manifold & Plenum, Ported/Polished Throttle Body, CMR Tune by Johan, Airhammer HO, Custom Catback

    CNC Inertia Performance Heads
     
  4. 11-02-2008 03:40 PM #3
    rwalshphoto
    rwalshphoto is offline
    Magnified rwalshphoto's Avatar rwalshphoto is a Magnum Genious! rwalshphoto is a Magnum Genious! rwalshphoto is a Magnum Genious! rwalshphoto is a Magnum Genious! rwalshphoto is a Magnum Genious! rwalshphoto is a Magnum Genious! rwalshphoto is a Magnum Genious! rwalshphoto is a Magnum Genious! rwalshphoto is a Magnum Genious! rwalshphoto is a Magnum Genious! rwalshphoto is a Magnum Genious!
    Join Date
    Oct 2007
    Location
    Phoenix, AZ
    Posts
    2,297
    Send a message via Yahoo to rwalshphoto

    CustomMagnums.com Thread Starter
    Corvette Parts for HIN
    JetHot Sterling Ceramic Coated Valve Covers & Timing Covers, JBA Coated Shorties, Inertia Motorsport V1.1 Camshafts, Port Matched Manifold & Plenum, Ported/Polished Throttle Body, CMR Tune by Johan, Airhammer HO, Custom Catback

    CNC Inertia Performance Heads
     
  5. 11-02-2008 03:40 PM #4
    rwalshphoto
    rwalshphoto is offline
    Magnified rwalshphoto's Avatar rwalshphoto is a Magnum Genious! rwalshphoto is a Magnum Genious! rwalshphoto is a Magnum Genious! rwalshphoto is a Magnum Genious! rwalshphoto is a Magnum Genious! rwalshphoto is a Magnum Genious! rwalshphoto is a Magnum Genious! rwalshphoto is a Magnum Genious! rwalshphoto is a Magnum Genious! rwalshphoto is a Magnum Genious! rwalshphoto is a Magnum Genious!
    Join Date
    Oct 2007
    Location
    Phoenix, AZ
    Posts
    2,297
    Send a message via Yahoo to rwalshphoto

    CustomMagnums.com Thread Starter
    PS... The radiator panel and the bottom part of the shaker on the Redfox Racing car were not planned and have been fabricated in the past 24hrs...

    The Magnum radiator panel for resell will be slightly different we had to trim the sides off that fill the fender gap due to time constraints for fitment.
    __________________
    JetHot Sterling Ceramic Coated Valve Covers & Timing Covers, JBA Coated Shorties, Inertia Motorsport V1.1 Camshafts, Port Matched Manifold & Plenum, Ported/Polished Throttle Body, CMR Tune by Johan, Airhammer HO, Custom Catback

    CNC Inertia Performance Heads
     
  6. 11-02-2008 03:44 PM #5
    JERKDOGG
    JERKDOGG is offline
    "INSTITUTIONALIZED" JERKDOGG's Avatar
    JERKDOGG is a Magnum Genious! JERKDOGG is a Magnum Genious! JERKDOGG is a Magnum Genious! JERKDOGG is a Magnum Genious! JERKDOGG is a Magnum Genious! JERKDOGG is a Magnum Genious! JERKDOGG is a Magnum Genious! JERKDOGG is a Magnum Genious! JERKDOGG is a Magnum Genious! JERKDOGG is a Magnum Genious! JERKDOGG is a Magnum Genious!
    Join Date
    May 2008
    Location
    KEEP ON PUSHIN,IL.
    Posts
    4,944

    Thatz wutz up!!!!!


    >CLICK-FOR-MORE-PIKZ-OF-MY-WHIP<
     
  7. 11-02-2008 03:49 PM #6
    MagWag
    MagWag is offline
    They call me Destroyer MagWag's Avatar

    MagWag is the keeper of all Magnum knowledge! MagWag is the keeper of all Magnum knowledge! MagWag is the keeper of all Magnum knowledge! MagWag is the keeper of all Magnum knowledge! MagWag is the keeper of all Magnum knowledge! MagWag is the keeper of all Magnum knowledge! MagWag is the keeper of all Magnum knowledge! MagWag is the keeper of all Magnum knowledge! MagWag is the keeper of all Magnum knowledge! MagWag is the keeper of all Magnum knowledge! MagWag is the keeper of all Magnum knowledge!
    Join Date
    Jul 2007
    Location
    Im anywhere and everywhere
    Posts
    11,106
    Send a message via AIM to MagWag Send a message via MSN to MagWag Send a message via Yahoo to MagWag

    Nathan's magnum is sooo nasty! And ya'll are just stepping it up MORE!
    MEMBERS MAP!

    www.myspace.com/thompstud


    rollin a dodge... it just aint a magnum
     
  8. 11-02-2008 05:09 PM #7
    txnhockey3
    txnhockey3 is offline
    Member txnhockey3's Avatar txnhockey3 is a Magnum Expert in Training! txnhockey3 is a Magnum Expert in Training! txnhockey3 is a Magnum Expert in Training! txnhockey3 is a Magnum Expert in Training!
    Join Date
    Jun 2008
    Location
    Dallas, Texas!
    Posts
    562
    LOOKS AMAZING..... Might need to go change my shorts

    Looks great guys... The firewall cover to me looks kinda weird with those big gaps..
     
  9. 11-02-2008 05:24 PM #8
    rwalshphoto
    rwalshphoto is offline
    Magnified rwalshphoto's Avatar rwalshphoto is a Magnum Genious! rwalshphoto is a Magnum Genious! rwalshphoto is a Magnum Genious! rwalshphoto is a Magnum Genious! rwalshphoto is a Magnum Genious! rwalshphoto is a Magnum Genious! rwalshphoto is a Magnum Genious! rwalshphoto is a Magnum Genious! rwalshphoto is a Magnum Genious! rwalshphoto is a Magnum Genious! rwalshphoto is a Magnum Genious!
    Join Date
    Oct 2007
    Location
    Phoenix, AZ
    Posts
    2,297
    Send a message via Yahoo to rwalshphoto

    CustomMagnums.com Thread Starter
    Quote: Originally Posted by txnhockey3 View Post
    LOOKS AMAZING..... Might need to go change my shorts

    Looks great guys... The firewall cover to me looks kinda weird with those big gaps..
    If we had more time and parts in advance believe me there wouldnt be quite those large of gaps. But bear in mind to this is one nasty motor and its gonna shake like a mofo. Stroked 426 with 12psi off of the F1 ProCharger intercooled running pure methanol.
    JetHot Sterling Ceramic Coated Valve Covers & Timing Covers, JBA Coated Shorties, Inertia Motorsport V1.1 Camshafts, Port Matched Manifold & Plenum, Ported/Polished Throttle Body, CMR Tune by Johan, Airhammer HO, Custom Catback

    CNC Inertia Performance Heads
     
  10. 11-02-2008 06:20 PM #9
    txnhockey3
    txnhockey3 is offline
    Member txnhockey3's Avatar txnhockey3 is a Magnum Expert in Training! txnhockey3 is a Magnum Expert in Training! txnhockey3 is a Magnum Expert in Training! txnhockey3 is a Magnum Expert in Training!
    Join Date
    Jun 2008
    Location
    Dallas, Texas!
    Posts
    562
    Quote: Originally Posted by rwalshphoto View Post
    If we had more time and parts in advance believe me there wouldnt be quite those large of gaps. But bear in mind to this is one nasty motor and its gonna shake like a mofo. Stroked 426 with 12psi off of the F1 ProCharger intercooled running pure methanol.
    true true, still giving beans....

    The new colours are neat, but not my cup of tea
    Good work, looks like you guys have been busy and is that the air intake you have be so excited about?
     
  11. 11-02-2008 06:51 PM #10
    GreenKing
    GreenKing is offline
    yep...im that guy GreenKing's Avatar



    GreenKing knows more than the President of Chrysler! GreenKing knows more than the President of Chrysler! GreenKing knows more than the President of Chrysler! GreenKing knows more than the President of Chrysler! GreenKing knows more than the President of Chrysler! GreenKing knows more than the President of Chrysler! GreenKing knows more than the President of Chrysler! GreenKing knows more than the President of Chrysler! GreenKing knows more than the President of Chrysler! GreenKing knows more than the President of Chrysler! GreenKing knows more than the President of Chrysler!
    Join Date
    Dec 2007
    Location
    Probably the PIT STOP
    Posts
    13,569
    Send a message via MSN to GreenKing
    looks like a lot of great new products, man, great job!
     
Page 1 of 3 1 2 3 LastLast
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules