
Tools: dremel with cutoff disk, epoxy, spot putty filler and pad sander.
Premodified stock non-nav bezel
DVD's bezel to be flushed in with bottom trimmed to fit over the top of the A/C controls
DVD Bezel lined up for the cuts.
DVD Bezel superglued in, dang compuound curves.
![]()
Last edited by Chutsk10; 07-02-2012 at 10:54 PM. Reason: Title change.
The Vehicle Formally Known As JamminWagon

First sanding with the "ears" expoxied in
Nasty gaps due to cutting a lil big and compound curves.
Remember the old school way of body working called "leading". Took some scrap plastic, lit it with a lighter and then pushed the melted plastic in to fill the gaps.
sanded after using plastic weld.
![]()
Last edited by JamminWagon; 05-16-2011 at 12:18 AM.
The Vehicle Formally Known As JamminWagon

And the state it is in now waiting for the spot putty filler to dry and the backside of the DVD bezel loaded with expoy on the backside for extra strength.
First 220 grit sanding
second putty fill
Day of final sandings and filling, going to use this textured black paint that I found at the local home center. After I find some filler primer that is plastic friendly. More to come!
Last edited by JamminWagon; 05-16-2011 at 12:19 AM.
The Vehicle Formally Known As JamminWagon

First coat of Rustoleum Textured Plastic Paint. Still shiny from being wet, dries matte.
OK DONE!!!!!!!!!!!!!!!!!!
Final coat applied with A/C & top buttons attached. #1 trick make sure that you are 10-12" away (like instructions say haha) or the finish will be shiny!!
And drumroll please!!!!!!!!!!
![]()
Last edited by JamminWagon; 05-16-2011 at 12:21 AM.
The Vehicle Formally Known As JamminWagon

OK I reloaded the pics, forgot that I had moved ISPs
The Vehicle Formally Known As JamminWagon

Hahaah, yeah I have strangle my gnome at times, inpoint: Did it again, amp/sub area change
Cam makes it look darker than it really is
![]()
Last edited by JamminWagon; 10-27-2007 at 09:56 AM.
The Vehicle Formally Known As JamminWagon
I use the little pocket for my remote and an occasional dvd. ( switching from cd to dvd )
Lookin good Jamminwagon! Nice work!!!
Holey shit you did a lot of work to get that done! Wouldn't it have just been easier to buy a nav bezel??? Looks wicked good though i have to give you that! Wana make me one? LOL!
Nice work man!
I think I would pop for the $80 or so for a factory nav bezel. Your work looks awesome though. I don't have the skills for that.
"The Marines I have seen around the world have the cleanest bodies, the filthiest minds, the highest morale, and the lowest morals of any group of animals I have ever seen. Thank God for the United States Marine Corps!"-Eleanor Roosevelt, First Lady of the United States, 1945