engine whine

PearlMag7 · 05-17-2006, 09:10 AM

i have alot of engine whine coming from my speakers i ran the rca on the oppostie side of the car then the power and ground wire have yall had any of these problems? i have a 4 ch infinity amp. and infinity components with a pioneer avic d1 please help if you have this problem it is annoying.

JamminWagon · 05-28-2006, 09:13 PM

One thing to try is running a common ground from the HU to the amp. It does not have to huge guage wires. What you are doing is making a common signal ground. Of course you want to make sure that your power grounds are good.

cjvd0724 · 06-20-2006, 04:44 PM

Make sure your amp is grounded to a solid paint free area. If you have paint on your ground point it can cause a whine. Also if you have rcas that screw to get tighter or looser make sure they are screwed in all the way if they are loose it can also cause a whine.

05-17-2006, 09:10 AM	#1
PearlMag7 Junior Member Join Date: May 2006 Location: texas Posts: 16 iTrader: (0)	engine whine i have alot of engine whine coming from my speakers i ran the rca on the oppostie side of the car then the power and ground wire have yall had any of these problems? i have a 4 ch infinity amp. and infinity components with a pioneer avic d1 please help if you have this problem it is annoying.

05-28-2006, 09:13 PM	#2
JamminWagon Senior Member Join Date: Dec 2005 Location: Cheyenne, WY Posts: 969 iTrader: (0)	One thing to try is running a common ground from the HU to the amp. It does not have to huge guage wires. What you are doing is making a common signal ground. Of course you want to make sure that your power grounds are good.
	JamminWagon's Sig: KENWOOD HU: DDX-7017; ALPINE Gear : PKG-1000 10.2" Overhead DVD SPEAKERS: SPS-080A, SPS-170A, SPS-690A, SWR-1542D, AMPS: MRV-M345, MRD-M605, Removed Roof Rack, Badges & Wiper, Silver headlights, OEM Fogs & Painted Bezels, Autohatch Mod (strutwise struts and trunk release button) Rear Goodyear EAGLE RS-A 255/55R17, Flowmaster 50, AirRaid CAI, Eibach Sportlines 2"

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove Advertisements Sponsored Links
Supporting Members do not see these ads.

06-20-2006, 04:44 PM	#3
cjvd0724 Junior Member Join Date: Jun 2006 Posts: 11 iTrader: (0)	Make sure your amp is grounded to a solid paint free area. If you have paint on your ground point it can cause a whine. Also if you have rcas that screw to get tighter or looser make sure they are screwed in all the way if they are loose it can also cause a whine.