head unit install

cdot757 · 03-04-2008, 05:14 AM

hey just had a quick question...its kind of funny because i used to work in roadshop for circuit city but dont know how to take the radio out im my magnum. I never did 1 before the close thing i got to it was a neon. but anyway before i start break stuff in my car what am i taking out to get to the head unit? b/c i tried taking the ash tray out but i didnt want to break it so i left it alone . just trying to get some feed back

Karlito · 03-04-2008, 05:31 AM

The ash tray dosent need to come out. Just pop off the bezel and the radio is held in by 4 screws. Very simple. If you have any problems I can take a couple pics.

cdot757 · 03-04-2008, 05:45 AM

thanks cuz i was bout to start breaking stuff but yea if u can can u send the pics

krewkut125 · 03-04-2008, 09:24 AM

Yea the center bezel is the only thing you need to remove. (the chunk of plastic either silver or black surrounding the radio, air controls, and hazzard button assy) You can just pop it off because it is held in by clips. I start at the top where it meets the dash and work my way down. Then you will need to unplug the button assembly (Just a simple plug) then the radio is right there!

cdot757 · 03-04-2008, 11:50 AM

o ok man i though it was hard and i call my self an audio installer. thanks

krewkut125 · 03-04-2008, 01:21 PM

lol, no it is not hard at all. and any time!

MagWag · 03-04-2008, 05:20 PM

another satisfied customer of CM.com, lol

03-04-2008, 05:14 AM	#1
cdot757 Junior Member Join Date: Feb 2008 Location: norfolk,va Posts: 21 iTrader: (0)	head unit install hey just had a quick question...its kind of funny because i used to work in roadshop for circuit city but dont know how to take the radio out im my magnum. I never did 1 before the close thing i got to it was a neon. but anyway before i start break stuff in my car what am i taking out to get to the head unit? b/c i tried taking the ash tray out but i didnt want to break it so i left it alone . just trying to get some feed back
	cdot757's Sig: you aint seen money till you seen me!!!!

03-04-2008, 05:31 AM	#2
Karlito ~ Vermittler ~ Join Date: May 2007 Location: Topeka, KS Posts: 3,698 iTrader: (1)	The ash tray dosent need to come out. Just pop off the bezel and the radio is held in by 4 screws. Very simple. If you have any problems I can take a couple pics.
	Karlito's Sig: *~~~~ My CarDomain Page ~~~~*

03-04-2008, 05:45 AM	#3
cdot757 Junior Member Join Date: Feb 2008 Location: norfolk,va Posts: 21 iTrader: (0)	thanks cuz i was bout to start breaking stuff but yea if u can can u send the pics
	cdot757's Sig: you aint seen money till you seen me!!!!

03-04-2008, 11:50 AM	#5
cdot757 Junior Member Join Date: Feb 2008 Location: norfolk,va Posts: 21 iTrader: (0)	o ok man i though it was hard and i call my self an audio installer. thanks
	cdot757's Sig: you aint seen money till you seen me!!!!

03-04-2008, 05:20 PM	#7
MagWag Evaluating... Join Date: Jul 2007 Location: Lots of hotels...(Adress in Monett, MO) Posts: 7,405 iTrader: (0)	another satisfied customer of CM.com, lol
	MagWag's Sig:MEMBERS MAP! www.myspace.com/thompstud No, No, NO DRAMA!

Remove Advertisements Sponsored Links
Supporting Members do not see these ads.

03-04-2008, 09:24 AM	#4
krewkut125 Senior Member Join Date: Sep 2007 Location: Palm Bay, Florida Posts: 3,012 iTrader: (0)	Yea the center bezel is the only thing you need to remove. (the chunk of plastic either silver or black surrounding the radio, air controls, and hazzard button assy) You can just pop it off because it is held in by clips. I start at the top where it meets the dash and work my way down. Then you will need to unplug the button assembly (Just a simple plug) then the radio is right there!

03-04-2008, 01:21 PM	#6
krewkut125 Senior Member Join Date: Sep 2007 Location: Palm Bay, Florida Posts: 3,012 iTrader: (0)	lol, no it is not hard at all. and any time!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode