You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. There are no requirements for membership, you don't even have to own a Magnum. Registration is fast, simple and absolutely free so please, join our community today!
If you have any problems with the registration process or your account login, please contact contact us.
I am asking this on behalf for a customer that is presently over in Iraq and he would like to have sub enclosure done and delivered before he gets back home.
The OEM folding cargo floor is 39" wide -- gives it enough room to slide in without scuffing.
Thanks for the info Maddad, much appreciated.
I saw the one post for what someone did for an enclosure installed in the floor and based on what those dimensions he provided I speculated that a width of 38" was a pretty safe bet.
Phil
Woodlawn Cabinetry
Last edited by MrCabinetry; 03-12-2008 at 09:13 AM..
I saw the one post for what someone did for an enclosure installed in the floor and based on what those dimensions he provided I speculated that a width of 38" was a pretty safe bet.
Phil
Woodlawn Cabinetry
If you are talking about this
That would be me, if you are doing a straight box (keeping spare) then its easy. You need to decide if you are going to wrap the covering on the sides too or just a top layer. I measured the carperting and it was 1/8 inch so I made the box 1/4 shorter than the 39 that the trifold panel measured.
03-12-2008, 08:03 AM
Linear Mode
