sub layout help

theagentorange · 03-31-2008, 08:02 AM

so i need some ideas on how i can lay my subs/sound system. I dont wanna go in the side pockets (i think it looks awesome, but everyone has done it) and i dont want just a plain box thrown up against the back seats. i like things to look finished and clean. and i dont wanna loose the spare tire either.

i've got one amp to fit in, and 2 10" mtx subs that are about 6.1" deep

so, ideas? anyone?

rob619 · 03-31-2008, 02:56 PM

get creative with some fiberglass, two 10's you can glass in there pretty easy.

Bigal470 · 03-31-2008, 03:01 PM

now a days everyone has done just about everything so i would grab some fiberglass, resin and a thinking cap..........

2stepinit · 03-31-2008, 03:28 PM

yea man with just 2 tens you can pretty much do anything from doing two fiberglass pods in the rear or continuing the center console all the way to the rear and build the box on the rear hump and do them reverse . really if u can think it you can do it with glass

JamminWagon · 03-31-2008, 05:32 PM

Here is the box I did in the beginning housing 1 10" Alpines. The box measured 39x18x7. This gave a mounting depth of 6.25" If you notice it sits 1/4" higher than the amp rack cover. It worked out perfect that a piece of carpeting was 1/4". So with the amp cover covered it looked flush. 18" allowed me to cut the composite battery cover (the felt plastic thingy) at the fold point.

Unfort I dont have any pics of the cover covered, I lost a HD with all my pics.

The same box modded for a 12"

theagentorange · 03-31-2008, 06:01 PM

thanks guys!

i think i'm actually gonna go with 2 slight wedges (facing more up than anything, and a lil towards the rear) angled slightly inwards (facing each other) against the rear seats. in between i'm gonna attached them with a box that eventually i'll use to house either the xbox of pair of caps, with led's/neon. and then a fluch mounted into the floor amp rack, with plexi and more lights (i like lights, hehe). mostly wrapped with black/grey vinyl and some red airbrushed accents (if i can get the car exterior color mixed up right).

i was gonna do the fibreglass thing, but i've grown sick of making them lately, and i really havent seen many done in the magnum's that i even really liked. seem's more of a boxy, clean classy kinda car.

03-31-2008, 08:02 AM	#1
theagentorange Senior Member Join Date: Mar 2008 Location: Moncton, NB, Canada Posts: 111 iTrader: (0)	sub layout help so i need some ideas on how i can lay my subs/sound system. I dont wanna go in the side pockets (i think it looks awesome, but everyone has done it) and i dont want just a plain box thrown up against the back seats. i like things to look finished and clean. and i dont wanna loose the spare tire either. i've got one amp to fit in, and 2 10" mtx subs that are about 6.1" deep so, ideas? anyone?

03-31-2008, 03:01 PM	#3
Bigal470 One wicked azz car! Join Date: Oct 2006 Location: Oceanside, CA Posts: 4,550 iTrader: (0)	now a days everyone has done just about everything so i would grab some fiberglass, resin and a thinking cap..........
	Bigal470's Sig:

03-31-2008, 05:32 PM	#5
JamminWagon Senior Member Join Date: Dec 2005 Location: Cheyenne, WY Posts: 971 iTrader: (0)	Here is the box I did in the beginning housing 1 10" Alpines. The box measured 39x18x7. This gave a mounting depth of 6.25" If you notice it sits 1/4" higher than the amp rack cover. It worked out perfect that a piece of carpeting was 1/4". So with the amp cover covered it looked flush. 18" allowed me to cut the composite battery cover (the felt plastic thingy) at the fold point. Unfort I dont have any pics of the cover covered, I lost a HD with all my pics. The same box modded for a 12" Last edited by JamminWagon; 03-31-2008 at 05:34 PM..
	JamminWagon's Sig: KENWOOD HU: DDX-7017; ALPINE Gear : PKG-1000 10.2" Overhead DVD SPEAKERS: SPS-080A, SPS-170A, SPS-690A, SWR-1542D, AMPS: MRV-M345, MRD-M605, Removed Roof Rack, Badges & Wiper, Silver headlights, OEM Fogs & Painted Bezels, Autohatch Mod (strutwise struts and trunk release button) Rear Goodyear EAGLE RS-A 255/55R17, Flowmaster 50, AirRaid CAI, Eibach Sportlines 2"

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove Advertisements Sponsored Links
Supporting Members do not see these ads.

03-31-2008, 02:56 PM	#2
rob619 Senior Member Join Date: Jul 2007 Location: San Diego Posts: 379 iTrader: (0)	get creative with some fiberglass, two 10's you can glass in there pretty easy.

03-31-2008, 03:28 PM	#4
2stepinit Junior Member Join Date: Oct 2007 Posts: 24 iTrader: (0)	yea man with just 2 tens you can pretty much do anything from doing two fiberglass pods in the rear or continuing the center console all the way to the rear and build the box on the rear hump and do them reverse . really if u can think it you can do it with glass

03-31-2008, 06:01 PM	#6
theagentorange Senior Member Join Date: Mar 2008 Location: Moncton, NB, Canada Posts: 111 iTrader: (0)	thanks guys! i think i'm actually gonna go with 2 slight wedges (facing more up than anything, and a lil towards the rear) angled slightly inwards (facing each other) against the rear seats. in between i'm gonna attached them with a box that eventually i'll use to house either the xbox of pair of caps, with led's/neon. and then a fluch mounted into the floor amp rack, with plexi and more lights (i like lights, hehe). mostly wrapped with black/grey vinyl and some red airbrushed accents (if i can get the car exterior color mixed up right). i was gonna do the fibreglass thing, but i've grown sick of making them lately, and i really havent seen many done in the magnum's that i even really liked. seem's more of a boxy, clean classy kinda car.