fender roll help

envyoftheworld · 08-23-2008, 09:23 PM

hey any cali folks no where i can get my fenders rolled?

QuickSilver08 · 08-23-2008, 10:36 PM

Dont know, but you can buy or rent the tool. Search "fender roller"

-Floyd

So*Cal Magnum · 08-23-2008, 11:52 PM

arent they available at autozone for rent??

gstr6800 · 08-24-2008, 04:49 AM

Try a baseball bat. That works the same. Just heat up your fenders first to save the paint.

Bay Area Magnum · 08-24-2008, 05:56 AM

When I rolled mine in the stang is did this

First I scored the paint at the 1/2 way mark on the lip

I them took a body hammer and gently tapped the fender until the were "rolled"

If you can rent the tool at autozone that is ALOT less work..

1blkperl · 08-24-2008, 11:00 AM

Greg, why do you now need to roll um ? did you or are you changing somthing ?

QuickSilver08 · 08-24-2008, 11:07 AM

Fender Lip Rolling Tool

gomojo31 · 08-24-2008, 11:14 AM

This is how i did mine:
I wrapped the inner fenders with painter's tape to protect the paint. Then I heated the fenders and placed a baseball bat between the tire and fender. Roll the bat and you're done. My paint didnt chip/crap, nothing.

bubbamagnum · 08-24-2008, 11:29 AM

The shop here in Roseville will do them Greg

envyoftheworld · 08-25-2008, 03:16 AM

Thanks for the help everyone~i might just drive up to roseville~the reason is the inside of the front fenders is cutting chucks out of my tires~and im thinking about puttin 24's on

08-23-2008, 09:23 PM	#1
envyoftheworld B.A.M.M Join Date: Nov 2007 Location: san jose, ca Posts: 167 iTrader: (0)	fender roll help hey any cali folks no where i can get my fenders rolled?
	envyoftheworld's Sig:

08-23-2008, 10:36 PM	#2
QuickSilver08 80revliSkciuQ Join Date: May 2008 Location: Severn, MD Posts: 2,905 iTrader: (1)	Dont know, but you can buy or rent the tool. Search "fender roller" -Floyd
	QuickSilver08's Sig:2008 Dodge Magnum SXT "Holly Molly" // 2006 Dodge Magnum R/T "Beast" (GONE) ^^^ Click image to view our group! ^^^

08-23-2008, 11:52 PM	#3
So*Cal Magnum Chillin' in the Mag Join Date: Feb 2008 Location: Orange County, CA Posts: 3,212 iTrader: (0)	arent they available at autozone for rent??
	SoCal Magnum's Sig: Eddie's 2008 Dodge Magnum SE* DODGER Fan 4 Life!!! Livin' The OC Life and Lovin' It!

08-24-2008, 05:56 AM	#5
Bay Area Magnum MOPAR SHOW OFF 09' Join Date: Mar 2008 Location: Wesley Chapel FL Posts: 2,097 iTrader: (0)	When I rolled mine in the stang is did this First I scored the paint at the 1/2 way mark on the lip I them took a body hammer and gently tapped the fender until the were "rolled" If you can rent the tool at autozone that is ALOT less work..
	Bay Area Magnum's Sig: Donations Now being accepted for Kids Beating Cancer send paypal to moparshowoff@yahoo.com

08-24-2008, 11:00 AM	#6
1blkperl Senior Member Join Date: May 2008 Location: virginia City Highlands NV. Posts: 3,890 iTrader: (2)	Greg, why do you now need to roll um ? did you or are you changing somthing ?
	1blkperl's Sig:BAD BOY'S BAD BOY's..... WHAT-CHA GUNNA..DO WHEN THEY FLY BUY YOU BEWARE OF THE PEARL !!

Remove Advertisements Sponsored Links
Supporting Members do not see these ads.

08-24-2008, 04:49 AM	#4
gstr6800 From Silver 2 Sexy Bullet Join Date: Apr 2008 Location: Hotlanta Posts: 1,200 iTrader: (0)	Try a baseball bat. That works the same. Just heat up your fenders first to save the paint.

08-24-2008, 11:07 AM	#7
QuickSilver08 80revliSkciuQ Join Date: May 2008 Location: Severn, MD Posts: 2,905 iTrader: (1)	Fender Lip Rolling Tool
	QuickSilver08's Sig:2008 Dodge Magnum SXT "Holly Molly" // 2006 Dodge Magnum R/T "Beast" (GONE) ^^^ Click image to view our group! ^^^

08-24-2008, 11:14 AM	#8
gomojo31 06 Dodge Van Magnum Join Date: Feb 2008 Location: Florida Posts: 2,399 iTrader: (0)	This is how i did mine: I wrapped the inner fenders with painter's tape to protect the paint. Then I heated the fenders and placed a baseball bat between the tire and fender. Roll the bat and you're done. My paint didnt chip/crap, nothing.
	gomojo31's Sig: Donations Now being accepted for Kids Beating Cancer send paypal to moparshowoff@yahoo.com

08-24-2008, 11:29 AM	#9
bubbamagnum Senior Member Join Date: Jun 2007 Posts: 1,076 iTrader: (0)	The shop here in Roseville will do them Greg
	bubbamagnum's Sig: Bubbamagnum Build ETA completion date August 1st,2008.

08-25-2008, 03:16 AM	#10
envyoftheworld B.A.M.M Join Date: Nov 2007 Location: san jose, ca Posts: 167 iTrader: (0)	Thanks for the help everyone~i might just drive up to roseville~the reason is the inside of the front fenders is cutting chucks out of my tires~and im thinking about puttin 24's on
	envyoftheworld's Sig:

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode