Supporting Members do not see these ads.


Reply to Thread
Page 1 of 2 1 2 LastLast
Results 1 to 10 of 13




  1. 02-16-2009 04:20 PM #1
    jpnewlin
    jpnewlin is offline
    Member jpnewlin's Avatar jpnewlin is a Magnum Expert in Training! jpnewlin is a Magnum Expert in Training! jpnewlin is a Magnum Expert in Training!
    Join Date
    May 2008
    Location
    Nashville, TN.
    Posts
    456

    CustomMagnums.com Thread Starter

    Exclamation Hit in the rear. Need help!

    I was hit in the rear and i need to replace the hatch and the rear bumper.
    Anyone have any recommendations on where i can find the parts?

    I would like to upgrade the bumper to an SRT-8 bumper if possible...

    Any help would be appreciated.
    Reply With Quote
     
  2. 02-16-2009 04:20 PM # ADS
    Advertisement
    Sponsored Advertiser
    Join Date
    Nov 2006
    Location
    Interwebz
    Posts
    Who's Counting

  3. 02-16-2009 04:23 PM #2
    GreenKing
    GreenKing is offline
    yep...im that guy GreenKing's Avatar



    GreenKing knows more than the President of Chrysler! GreenKing knows more than the President of Chrysler! GreenKing knows more than the President of Chrysler! GreenKing knows more than the President of Chrysler! GreenKing knows more than the President of Chrysler! GreenKing knows more than the President of Chrysler! GreenKing knows more than the President of Chrysler! GreenKing knows more than the President of Chrysler! GreenKing knows more than the President of Chrysler! GreenKing knows more than the President of Chrysler! GreenKing knows more than the President of Chrysler!
    Join Date
    Dec 2007
    Location
    Probably the PIT STOP
    Posts
    13,569
    Send a message via MSN to GreenKing

    I can get you a rear hatch for 500~~~would need to know your location to get the one closest to you or figure shipping, depending on how far it was

    and as far as I know, there is no difference in the srt and other models rear bumper
    DeadDog~CMOM~'nuff said!
    ~UnNatural Disaster~
    Reply With Quote
     
  4. 02-16-2009 04:29 PM #3
    stingrayj
    stingrayj is offline
    Quando omni flunkus moritati. stingrayj's Avatar stingrayj is a Magnum Genious! stingrayj is a Magnum Genious! stingrayj is a Magnum Genious! stingrayj is a Magnum Genious! stingrayj is a Magnum Genious! stingrayj is a Magnum Genious! stingrayj is a Magnum Genious! stingrayj is a Magnum Genious! stingrayj is a Magnum Genious! stingrayj is a Magnum Genious! stingrayj is a Magnum Genious!
    Join Date
    Sep 2008
    Location
    Hanover, PA
    Posts
    3,598

    Quote: Originally Posted by GreenKing View Post
    I can get you a rear hatch for 500~~~would need to know your location to get the one closest to you or figure shipping, depending on how far it was

    and as far as I know, there is no difference in the srt and other models rear bumper
    The SRT rear bumer cover is, in fact, different. I am 100% positive on that. It is flared out a bit at the bottom (kinda like it has built in ground effects) and lower section around the tail pipes is different. I think that the whole thing is a bit lower than the other models, as well, to provide a lower appearance.
    Reply With Quote
     
  5. 02-16-2009 04:34 PM #4
    GreenKing
    GreenKing is offline
    yep...im that guy GreenKing's Avatar



    GreenKing knows more than the President of Chrysler! GreenKing knows more than the President of Chrysler! GreenKing knows more than the President of Chrysler! GreenKing knows more than the President of Chrysler! GreenKing knows more than the President of Chrysler! GreenKing knows more than the President of Chrysler! GreenKing knows more than the President of Chrysler! GreenKing knows more than the President of Chrysler! GreenKing knows more than the President of Chrysler! GreenKing knows more than the President of Chrysler! GreenKing knows more than the President of Chrysler!
    Join Date
    Dec 2007
    Location
    Probably the PIT STOP
    Posts
    13,569
    Send a message via MSN to GreenKing

    ^guess I should have said assuming that the other ones have the exhaust cut-outs, that I knew, had no idea that the rest was different, hhmmm
    DeadDog~CMOM~'nuff said!
    ~UnNatural Disaster~
    Reply With Quote
     
  6. 02-16-2009 04:55 PM #5
    1blkperl
    1blkperl is offline
    Senior Member 1blkperl's Avatar


    1blkperl is the keeper of all Magnum knowledge! 1blkperl is the keeper of all Magnum knowledge! 1blkperl is the keeper of all Magnum knowledge! 1blkperl is the keeper of all Magnum knowledge! 1blkperl is the keeper of all Magnum knowledge! 1blkperl is the keeper of all Magnum knowledge! 1blkperl is the keeper of all Magnum knowledge! 1blkperl is the keeper of all Magnum knowledge! 1blkperl is the keeper of all Magnum knowledge! 1blkperl is the keeper of all Magnum knowledge! 1blkperl is the keeper of all Magnum knowledge!
    Join Date
    May 2008
    Location
    virginia City Highlands NV.
    Posts
    8,370

    Im sure someone will help. Welcome from Nor. NV
    Reply With Quote
     
  7. 02-16-2009 06:26 PM #6
    jpnewlin
    jpnewlin is offline
    Member jpnewlin's Avatar jpnewlin is a Magnum Expert in Training! jpnewlin is a Magnum Expert in Training! jpnewlin is a Magnum Expert in Training!
    Join Date
    May 2008
    Location
    Nashville, TN.
    Posts
    456

    CustomMagnums.com Thread Starter
    In reference to the rear hatch I am in Nashville, TN.

    I would prefer an SRT-8 bumper to utilize the dual exhaust cut-outs
    Reply With Quote
     
  8. 02-20-2009 05:46 AM #7
    jpnewlin
    jpnewlin is offline
    Member jpnewlin's Avatar jpnewlin is a Magnum Expert in Training! jpnewlin is a Magnum Expert in Training! jpnewlin is a Magnum Expert in Training!
    Join Date
    May 2008
    Location
    Nashville, TN.
    Posts
    456

    CustomMagnums.com Thread Starter
    Thanks 1blkperl
    Reply With Quote
     
  9. 02-20-2009 05:54 AM #8
    QuickSilver08
    QuickSilver08 is offline
    Senior Member QuickSilver08's Avatar

    QuickSilver08 is the keeper of all Magnum knowledge! QuickSilver08 is the keeper of all Magnum knowledge! QuickSilver08 is the keeper of all Magnum knowledge! QuickSilver08 is the keeper of all Magnum knowledge! QuickSilver08 is the keeper of all Magnum knowledge! QuickSilver08 is the keeper of all Magnum knowledge! QuickSilver08 is the keeper of all Magnum knowledge! QuickSilver08 is the keeper of all Magnum knowledge! QuickSilver08 is the keeper of all Magnum knowledge! QuickSilver08 is the keeper of all Magnum knowledge! QuickSilver08 is the keeper of all Magnum knowledge!
    Join Date
    May 2008
    Location
    Maryland
    Posts
    8,745

    Quote: Originally Posted by GreenKing View Post
    I can get you a rear hatch for 500~~~would need to know your location to get the one closest to you or figure shipping, depending on how far it was

    and as far as I know, there is no difference in the srt and other models rear bumper
    Notice how the body line on the bottom goes out a bit further and that it creats a lip above the cut outs




    Reply With Quote
     
  10. 02-20-2009 05:58 AM #9
    bookeem
    bookeem is offline
    In My Magbach..... bookeem's Avatar

    bookeem is a Magnum Genious! bookeem is a Magnum Genious! bookeem is a Magnum Genious! bookeem is a Magnum Genious! bookeem is a Magnum Genious! bookeem is a Magnum Genious! bookeem is a Magnum Genious! bookeem is a Magnum Genious! bookeem is a Magnum Genious! bookeem is a Magnum Genious! bookeem is a Magnum Genious!
    Join Date
    Jan 2009
    Location
    north jerzy
    Posts
    4,215

    an rt rear bumper has dual cut outs as well, the srt bumper has the chrome strip inserts in the bumper where ours dont, but those inserts are over a 100 bucks alone to replace..the srt bumper also has sort of a diffuser attatched to the bumper, not painted, but it sits the same height as any of the other bumpers,an rt bumper will save u a few hundred in the long run, but if u plan on ever getting the srt front fascia,in the future, then go for it..

    the cheapest route would be getting a SE or SXT rear bumper, cutting your own dual cutouts, and adding the exhast bezels around the cut outs..the bezels are like 10 15 bucks..

    Thank You Hazman
    Reply With Quote
     
  11. 02-20-2009 08:15 AM #10
    NOTPAID4MSRT8
    NOTPAID4MSRT8 is offline
    CMOM FOR DEC 08 NOTPAID4MSRT8's Avatar

    NOTPAID4MSRT8 is the one everyone should be listening to! NOTPAID4MSRT8 is the one everyone should be listening to! NOTPAID4MSRT8 is the one everyone should be listening to! NOTPAID4MSRT8 is the one everyone should be listening to! NOTPAID4MSRT8 is the one everyone should be listening to! NOTPAID4MSRT8 is the one everyone should be listening to! NOTPAID4MSRT8 is the one everyone should be listening to! NOTPAID4MSRT8 is the one everyone should be listening to! NOTPAID4MSRT8 is the one everyone should be listening to! NOTPAID4MSRT8 is the one everyone should be listening to! NOTPAID4MSRT8 is the one everyone should be listening to!
    Join Date
    Feb 2008
    Location
    Salisbury, North Carolina
    Posts
    16,677
    Send a message via Yahoo to NOTPAID4MSRT8

    Also the SRT rear bumper has the plastic diffuser!

    2006 Mag SRT8 (Brillant Black)
    SRT Floor Mats, grille emblem, & lighted door sills, Alum. Pedal Kit, Interior Blue lights, PappaJohn custom shift knob w leather boot, Big Bully Catch Can, strobes in grille & LMI Hammer Design CAI, Karl's Kreation custom console switch plate and 3G Custom engine covers & DUB Bomber rims 22x9.5 & 22x10.5
    "HEMI 6.1" Hood decals
    (Own 23 other cars)
    HEMI Registry #864 2/15/08
    Jim
    Reply With Quote
     
Reply to Thread
Page 1 of 2 1 2 LastLast
« Previous Thread | Next Thread »

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules