You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. There are no requirements for membership, you don't even have to own a Magnum. Registration is fast, simple and absolutely free so please, join our community today!
If you have any problems with the registration process or your account login, please contact contact us.
Exterior StylingGrills, Body Kits and other accessories
In my never ending quest for cheap / free mods, here is my afternoon project. $90 Ebay grille. $4.99 Primer and DupliColor color match paint, $35 Charger R/T badge.....I think it looks better than it did "silver" and if the paint chips I'll just touch it up!
It looks good. But how did you get it on there I have the same badge and my husband try to put it on when it had the factory grill and it came off and I already change the grill to a dual mesh, will it just fit on there now or how did you do it?
It looks good. But how did you get it on there I have the same badge and my husband try to put it on when it had the factory grill and it came off and I already change the grill to a dual mesh, will it just fit on there now or how did you do it?
I just stuck it on...and it sticks really well! If you look close at my grille you may notice that dividers are pretty wide side to side, and the grill is very thin front to back. I think it's actually similar to the stuff they put on the bottom of screen doors to keep the dog from ripping through. I stuck it on before mounting the grille, so I was able to turn it over with the badge on the table and press really hard!! There is actually a good amount of "surface area" to stick to. Other grilles that I have seen have very thin dividers, but are deeper front to back (like the SRT grille) so they have less surface area.
I bought mine off Ebay, but noticed the other day that NC-SXT (dodgemagnumgrill.com) sells them as well, and I would have bought from him had I known! He also sells an R/T badge that has posts on the back that I believe you can put nuts on. Give him a PM I'm sure he can hook you up!
I just stuck it on...and it sticks really well! If you look close at my grille you may notice that dividers are pretty wide side to side, and the grill is very thin front to back. I think it's actually similar to the stuff they put on the bottom of screen doors to keep the dog from ripping through. I stuck it on before mounting the grille, so I was able to turn it over with the badge on the table and press really hard!! There is actually a good amount of "surface area" to stick to. Other grilles that I have seen have very thin dividers, but are deeper front to back (like the SRT grille) so they have less surface area.
I bought mine off Ebay, but noticed the other day that NC-SXT (dodgemagnumgrill.com) sells them as well, and I would have bought from him had I known! He also sells an R/T badge that has posts on the back that I believe you can put nuts on. Give him a PM I'm sure he can hook you up!
Oh, I already have it and I also have the one for the back! But when we tried to put the one for the grill awhile back it wouldn't stay on!
05-13-2007, 07:37 PM
Linear Mode
