Front End Swap with 300 and vice versa

steve · 02-05-2006, 10:33 PM

I am thinking about getting a 300c in the future. I was thinking about getting it the same color as the magnum. Would we be able to swap front ends without having to go to the dealer to get additional parts?

I know people have swapped front ends on the magnum, but that was getting parts from the dealer. Do you think this would be possible?

saleensean · 02-06-2006, 07:35 PM

you would have everything you needed if you swapped the parts from one car to the other. you will have to cut some of the front light connectors from the cars and swap them also. the headlights and side lights have different connectors between the two cars.

steve · 02-06-2006, 08:53 PM

What about if the 300 has HID? Are the ballasts easy to remove and connect into the magnums' wiring?

SoCalRT · 02-07-2006, 08:32 AM

What I want to know is can you switch the Charger front end on to a Magnum?

saleensean · 02-07-2006, 07:58 PM

Steve, not sure about the HID's.

SoCal, the charger front nose is not a direct bolt on, the lines do not line up.

02-06-2006, 08:53 PM	#3
steve The Boss Join Date: Dec 2005 Location: Santa Barbara, CA Posts: 1,237 iTrader: (0)	What about if the 300 has HID? Are the ballasts easy to remove and connect into the magnums' wiring?
	steve's Sig:Steve 06 Magnum R/T - Tinted Tailights - Universal Air Suspension 1/2" valves with 3/8" line - Factor One HID 8000K Low Beam and Foglight Kit - K&N Intake - JBA EVOL Exhaust - Removed Side mouldings and rear badges - Carriage Works Upper and Lower Billet Grille - 20% tinted front windows and top of windshield - Superchips 91 octane flash - 22" Dub Shoreline wheels with Hankook Ventus ST 265/35/22 - Hotchkis Front & Rear Sway Bars - Eibach Pro Damper kit - Pioneer Avic Z2 - 10" Dayton Subwoofer in Fiberglass enclosure - Alpine 400w Mono Amp - Silver Navigation Bezel - SRT Seats - SRT headlights with AAC Halos and Led strip http://www.myspace.com/custommagnums - send a message with your friend request http://www.myspace.com/toomeycustoms - Shop's Myspace

02-07-2006, 08:32 AM	#4
SoCalRT Major Mag Nut Join Date: Nov 2005 Location: Lake Elsinore, CA Posts: 3,201 iTrader: (0)	What I want to know is can you switch the Charger front end on to a Magnum?
	SoCalRT's Sig:Later, Brett Click the pic to go to my site SoCalLX - " Where Southern California Car Culture Meets Modern Mopar Muscle"

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove Advertisements Sponsored Links
Supporting Members do not see these ads.

02-07-2006, 07:58 PM	#5
saleensean Member Join Date: Jan 2006 Posts: 96 iTrader: (0)	Steve, not sure about the HID's. SoCal, the charger front nose is not a direct bolt on, the lines do not line up.