22 inch rims

2005_44Magnum · 03-12-2006, 09:31 PM

I'm looking for good looking 22's for my magnum. I have an AWD, and that seems to be a problem for most.

Magzero · 03-13-2006, 01:14 AM

I have an 05' RT AWD. I've had the car for nine months. What i've learned with the awd is, find what you want rims,springs,exhaust,intake... and contact the company that makes it. There aren't too many of us out there with the AWD's, and advise is hard to come by...
If your looking at a new intake look into the AFE Magnumflow "stage 2"

Magzero
05' RT AWD

DA HNIC · 04-25-2007, 07:24 PM

I'm with you on that. There are less choices, but I found there are still a lot of wheels out there. One thing you have to think about is what you would like the look & stance of the Mag be. I'm going for the remote control car look so I'm doing 24 inch Structure s60's on my AWD. Remember that the stock offset of our AWD's in the 18inch wheel is +25. Staying in +25 to +40 will keep your wheels inside the fender. +18 (r/t rear wheel drive) or less will push your 22's outside of the fender at least an inch (remote control car style!) and make it a li'l harder to lower (KW 2 suspension or UniversalAir airride) Just keep that in mind. PM me if you need any more info.

03-12-2006, 09:31 PM	#1
2005_44Magnum Member Join Date: Mar 2006 Location: Newport News, VA Posts: 94 iTrader: (0)	22 inch rims I'm looking for good looking 22's for my magnum. I have an AWD, and that seems to be a problem for most.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove Advertisements Sponsored Links
Supporting Members do not see these ads.

03-13-2006, 01:14 AM	#2
Magzero Member Join Date: Feb 2006 Location: Chicago area Posts: 51 iTrader: (0)	I have an 05' RT AWD. I've had the car for nine months. What i've learned with the awd is, find what you want rims,springs,exhaust,intake... and contact the company that makes it. There aren't too many of us out there with the AWD's, and advise is hard to come by... If your looking at a new intake look into the AFE Magnumflow "stage 2" Magzero 05' RT AWD

04-25-2007, 07:24 PM	#3
DA HNIC 24's and AWD? Absolutely! Join Date: Feb 2007 Location: Cary, IL Posts: 1,469 iTrader: (0)	I'm with you on that. There are less choices, but I found there are still a lot of wheels out there. One thing you have to think about is what you would like the look & stance of the Mag be. I'm going for the remote control car look so I'm doing 24 inch Structure s60's on my AWD. Remember that the stock offset of our AWD's in the 18inch wheel is +25. Staying in +25 to +40 will keep your wheels inside the fender. +18 (r/t rear wheel drive) or less will push your 22's outside of the fender at least an inch (remote control car style!) and make it a li'l harder to lower (KW 2 suspension or UniversalAir airride) Just keep that in mind. PM me if you need any more info.