I need a catback set up for my SXT. If somebody can show me where to order it from that would be great. Im thinking either flowmaster or magnaflow. I want deep and loud. I want people to think i have a small V8. Im not worried about drone, so ill probably not get a new res. I just want to click/buy, and bring it to a local shop to install. I want to branch off into duel. Im just lost, dont know the sizes of anything. Sorry for all this rambling and confusion.
Thanks
![]()
22" Viper Rims!!, K&N CAI, Debadged, Wiper Delete, Open Mouth Grille, Plasti Dip Eye Lids, Custom Plates, Single Dinn To Double Dinn Mod. 2600W Of Raw Bass
Also i was thinking about blastin bobs pipes, but i feel like shipping to canada would be pretty crazy, so im not sure once again.
![]()
22" Viper Rims!!, K&N CAI, Debadged, Wiper Delete, Open Mouth Grille, Plasti Dip Eye Lids, Custom Plates, Single Dinn To Double Dinn Mod. 2600W Of Raw Bass
Just calculated shipping. $100 bucks.
![]()
22" Viper Rims!!, K&N CAI, Debadged, Wiper Delete, Open Mouth Grille, Plasti Dip Eye Lids, Custom Plates, Single Dinn To Double Dinn Mod. 2600W Of Raw Bass
A V6 won't sound like a V8 no matter the exhaust but it will sound good. If you're not concerned with drone, just buy a Flowmaster super 44 muffler or a Magnaflow muffler with 1 inlet and 2 exits. Take it to an exhaust shop and let them provide the piping and the work. You might also order whatever tips you like too.
Flowmaster super 44
Flowmaster 9425472 - Flowmaster Super 44 Series Mufflers - Overview - SummitRacing.com
Magnaflow
MagnaFlow 12158 - MagnaFlow Performance Mufflers - Overview - SummitRacing.com
'05 R/T
PPP stage 3 big valve heads - Howards cam 219/227 .600/.575 112 LSA (108 ICL) - PAC 1518 springs - forged pushrods - 6.1 lifters - 6.1 oil pump - 6.1 timing set - Modern Muscle stage 1+ ported 6.1 manifold& 85mm throttle body - 6.1 fuel injectors - 6.1 fuel rails - 25% UDP - Jet 180 tstat - LMI 4" true CAI - MSD "Blaster" coils - 8.2mm Taylor wires - JBA headers - JBA high flow mids - Corsa catback
Diablosport Intune - CMR by Ditos - Paramount "Dominator" 3000 stall tc & stage II valve body - Tranzformer shift kit - 226mm Getrag 3.91 LSD - BC racing coilovers - Eibach front & rear swaysBWoody endlinks - Razors Edge strut bar - Wilwood big brake kit by TCE - W6A 6 piston front calipers on 14.25" 2 piece GT rotors - Dynapro 4 piston rear calipers on 13" 2 piece GT rotorsVossen VVSCV3 & Nitto 420s - 22" x 9" w/265/35/22 & 22" x 10.5" w/295/30/22 ----- Hemi Registry #943
For real. I listened to sound clips for weeks, V6 and V8. It's a night and day difference, but there are some good sounding 6s out there. I'm pretty happy with how my SXT sounds with a Magnaflow muffler and Blastin Bobs 12db tips. It sounds nothin like a V8, but that's not what I was goin for. I know Demon's 2.7 sounds pretty sweet.
Just lower it.
I dont plan on having it sound like a V8, just the nice rumbly sound. I think im going to go with the 14db blastin bobs kit, and the flowmasters 44 series. The blastin bobs have a y pipe, so im assuming i should get 1 in 1 out centered? If im wrong please let me knowThanks
![]()
22" Viper Rims!!, K&N CAI, Debadged, Wiper Delete, Open Mouth Grille, Plasti Dip Eye Lids, Custom Plates, Single Dinn To Double Dinn Mod. 2600W Of Raw Bass
oh and everybody might think im a dumbass, but i think 5" tips look good.... there i said it! lol I dont want to look like a tonka truck, but i really think they look nice. Opinions?
![]()
![]()
22" Viper Rims!!, K&N CAI, Debadged, Wiper Delete, Open Mouth Grille, Plasti Dip Eye Lids, Custom Plates, Single Dinn To Double Dinn Mod. 2600W Of Raw Bass
I like em, the 1st time I seen em, I didn't even realize it until the guys were chatting about it, and I had to take a double take..." did he just 5" tips?" looks cool to me. I plan on doing 4" slanted/rolled
![]()
22" Viper Rims!!, K&N CAI, Debadged, Wiper Delete, Open Mouth Grille, Plasti Dip Eye Lids, Custom Plates, Single Dinn To Double Dinn Mod. 2600W Of Raw Bass
ok, so im glad im not the only one... Thought i was crazy for a minute. Ok last question quys. Inlet/outlet is 2.25 correct? im with blastin bobs y pipe im looking for a 1 in 1 out cenetered muffler?
![]()
22" Viper Rims!!, K&N CAI, Debadged, Wiper Delete, Open Mouth Grille, Plasti Dip Eye Lids, Custom Plates, Single Dinn To Double Dinn Mod. 2600W Of Raw Bass
Super 44 2.25IN(O)/OUT(O) 409S Stainless [842448] - $103.94 : Flowmaster Inc. Exhaust Shop, Love That Sound!
so this is what i want correct?
![]()
22" Viper Rims!!, K&N CAI, Debadged, Wiper Delete, Open Mouth Grille, Plasti Dip Eye Lids, Custom Plates, Single Dinn To Double Dinn Mod. 2600W Of Raw Bass
That muffler is shorter than stock. If you go with an 18" muffler, it's an easier swap if you're doin it yourself. You can just cut off at the stock muffler and attach the new muffler/tips, it all lines up and the tips are stickin out just past the bumper. That's what I did, anyway.
Just lower it.
Well i think the overall length is 19" the case length is 13" i dont see any other sizes, so i assume thats the one?
![]()
22" Viper Rims!!, K&N CAI, Debadged, Wiper Delete, Open Mouth Grille, Plasti Dip Eye Lids, Custom Plates, Single Dinn To Double Dinn Mod. 2600W Of Raw Bass