Halo Wireing Help

kgb44 · 03-31-2008, 06:40 PM

Can anyone tell me which wires to tap into for the Halo & Eyebrow lights?

JRob007 · 03-31-2008, 07:00 PM

Check out this thread... Halo Headlights

Hopefully that'll lead you in the right direction.....

dformer · 03-31-2008, 07:00 PM

which halos do you have? If its ACC halos then you would want BROWN for + and BLACK for -.

Russell · 03-31-2008, 07:31 PM

Hey

Can you connect the Halos and LEDs to the same wires?

MagnumRT05 · 04-01-2008, 08:44 PM

I tapped into the white/purple (parking lights) and the black wires. The white/green wire is for the turn signals. You will find these wires from the big black connector plug that was originally attached to your turn signal.

And yes I connected the halos and LEDs to the same wires.

Russell · 04-01-2008, 09:08 PM

Thanks MagnumRT05

Would you be able to post any pics of the wires you connected? This would help me out alot ..

MagnumRT05 · 04-02-2008, 03:19 PM

Quote:

Originally Posted by Russell

Thanks MagnumRT05

Would you be able to post any pics of the wires you connected? This would help me out alot ..

They are all taped up, but its easy. I have a cell phone camera, so I dont think it would help much but I can get pics if need be during the weekend. If you can find the wires from the old turn signal plug, then thats the hardest part. Heck, what I originally did was just strip the wires down 2 inches from the halo headlights, twisted all the +'s together then the -'s, and slid them down into the connector from the old turn signal. That way I wouldnt have to tap into the wires from the factory. It was basically just plug the wires down into the holes in the connector and I had lights!

03-31-2008, 06:40 PM	#1
kgb44 Senior Member Join Date: Jan 2008 Location: Mahwah, NJ Posts: 106 iTrader: (0)	Halo Wireing Help Can anyone tell me which wires to tap into for the Halo & Eyebrow lights?
	kgb44's Sig:2007 Black RT, AWD Magna Flow Exhaust JBA Shorty Headers & JBA Mids w/ High Flow Cats AFE Stage II Cold Air Intake 20" Black Boss Wheels Eibach Pro Kit DeBadged DeMolded BT Skull& Crossbones Rear Emblem Eyelids 8000K HID Low Beam & Fogs Black LED Tail lights Tinted Windows

03-31-2008, 07:00 PM	#2
JRob007 BakNdaHood... CM4Lyf! Join Date: May 2007 Location: Washington, DC Posts: 5,540 iTrader: (0)	Check out this thread... Halo Headlights Hopefully that'll lead you in the right direction.....
	JRob007's Sig: In Loving Memory.... #21..... you will be missed! Mini Mods: Chrome Taillight Bezels, Chrome Door Handle Covers, K&N Drop-in Air Filter, Billet Grille (upper and lower) Link to my photo albums

03-31-2008, 07:00 PM	#3
dformer Senior Member Join Date: Aug 2007 Location: Houston,Tx Posts: 1,157 iTrader: (1)	which halos do you have? If its ACC halos then you would want BROWN for + and BLACK for -.
	dformer's Sig:MODS: Check my profile.

04-01-2008, 08:44 PM	#5
MagnumRT05 Senior Member Join Date: Jan 2007 Location: North Olmsted, Ohio Posts: 249 iTrader: (0)	I tapped into the white/purple (parking lights) and the black wires. The white/green wire is for the turn signals. You will find these wires from the big black connector plug that was originally attached to your turn signal. And yes I connected the halos and LEDs to the same wires.
	MagnumRT05's Sig:Richie Mods -Slammed - UAS -Turbo - CIS -392ci Stroker w/ Crower Cam/Rods - Inertia

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove Advertisements Sponsored Links
Supporting Members do not see these ads.

03-31-2008, 07:31 PM	#4
Russell Senior Member Join Date: Dec 2007 Location: Toronto ,Canada Posts: 173 iTrader: (0)	Hey Can you connect the Halos and LEDs to the same wires?

04-01-2008, 09:08 PM	#6
Russell Senior Member Join Date: Dec 2007 Location: Toronto ,Canada Posts: 173 iTrader: (0)	Thanks MagnumRT05 Would you be able to post any pics of the wires you connected? This would help me out alot ..