You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. There are no requirements for membership, you don't even have to own a Magnum. Registration is fast, simple and absolutely free so please, join our community today!
If you have any problems with the registration process or your account login, please contact contact us.
Exterior StylingGrills, Body Kits and other accessories
I see alot of yall have de-badged and de-trimed your Mags. I'm just wondering what's involved in taking the trim off? Should I just use a heat gun and some 3M adhesive remover to take it off or is it attached another way??
Unless you have an SRT --- a heat gun, fishing line, and some goo-gone (adhesive remover) are all you need. If you have an '05 you may have bubbling under the side molding.
Use the heat gun (or wait for a warm day) then use the fishing line and "saw" under the molding/badges/trim followed by goo-gone to remove the adhesive and a good cleaning.
Unless you have an SRT --- a heat gun, fishing line, and some goo-gone (adhesive remover) are all you need. If you have an '05 you may have bubbling under the side molding.
Use the heat gun (or wait for a warm day) then use the fishing line and "saw" under the molding/badges/trim followed by goo-gone to remove the adhesive and a good cleaning.
05-12-2008, 04:48 PM
Linear Mode
