You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. There are no requirements for membership, you don't even have to own a Magnum. Registration is fast, simple and absolutely free so please, join our community today!
If you have any problems with the registration process or your account login, please contact contact us.
Exterior StylingGrills, Body Kits and other accessories
I am trying to rmove the Rams head emblem from the front grill cross bars and don't want to destroy it in the process. I'm passing it on to another member.
Any suggestions. I'm sure it's easy, but I'm a mechanical simpleton...
no its not the front emblem has a nub on the back that pokes through some tabs on the back here is a pic i drew up in in paint
This is what you gotta remove on the back of the facia. It is kinda tricky when I removed mine, but if you pry open all of the plastic clips it will pop right out. Hope this helps
Bassically just use some needle nose pliars and pull the plastic back clamps on the fascia, the alternative is to squeeze the crap out of emblem... hth.
I was able to remove the emblem without taking the bumper cover off... just took out the top row of pins and pulled it out a little. Used a long screwdriver to pry the clamps back and it lifted right out.
No damage to me or the car... When I'm workin' on a car, being able to claim that is a miracle. Beleive me, I'll bleed long before I'll damage my car.
05-17-2008, 10:14 AM
Linear Mode
