You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. There are no requirements for membership, you don't even have to own a Magnum. Registration is fast, simple and absolutely free so please, join our community today!
If you have any problems with the registration process or your account login, please contact contact us.
Exterior StylingGrills, Body Kits and other accessories
one of the members has it. he has the black mag with the bags. damn I forgot his name but I was askin him about it to. what i've gathered: simple install and it fits fine, I measured the rear and the longest you can put there is 50''
^^ I think that's 1BLSDESQ^^
I think someone else put one on the inside edge of the hatch, shining forward so it reflects in the gap between the hatch and bumper. But when it's off, you can't see it. Can't remember who that is though.
if you look on the shopping section of google, you can find the ones that have functions such as, driving light, turn signal (left/right half of the bar blinks) AND white LED for reverse
Looks nice, Phat. I'm guessing you spliced into the tail harness? I know on trucks you just plug into the trailer flat 4 pin, but I don't think I have a trailer harness on mine...I'll have to go check!
yes spliced into brake harness...there is a way to have it dim when parking lights are on and 100% on while braking...i dont know how to do it but blsdesq has it done on his magnum
there is a way to have it dim when parking lights are on and 100% on while brakeing
My guess would be to run both parking and brake power lines into the pos. On the led's but add a few resistors to the parking line. Would reduce power but might feed power to the brake line resulting in slightly brighter tails. No clue if that would work. Thoughts?