Starting issue

canadianstarbuck · 09-03-2008, 05:48 PM

I guys. I hope I am not the only one who experience this problem.
When I insert the key in the starter and I turn it to start it should activate the starter right away. I my case as soon as I hit the " start " position , the starter works only 2 seconds later. Sometimes it's fine , but many times it takes some time for the starter to react.

Could that be a known issue ?

tiggs11 · 09-07-2008, 01:46 PM

it's possible that the moduel for the ignition is slow dodge has had a problem with them i would start there.

09-03-2008, 05:48 PM	#1
canadianstarbuck Junior Member Join Date: Aug 2007 Posts: 12 iTrader: (0)	Starting issue I guys. I hope I am not the only one who experience this problem. When I insert the key in the starter and I turn it to start it should activate the starter right away. I my case as soon as I hit the " start " position , the starter works only 2 seconds later. Sometimes it's fine , but many times it takes some time for the starter to react. Could that be a known issue ?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove Advertisements Sponsored Links
Supporting Members do not see these ads.

09-07-2008, 01:46 PM	#2
tiggs11 Senior Member Join Date: Feb 2007 Location: courtenay b.c. Posts: 152 iTrader: (0)	it's possible that the moduel for the ignition is slow dodge has had a problem with them i would start there.