Got Horns ???

1blkperl · 09-12-2008, 08:33 AM

I know a few of you have Air horn systems. I want too do this. Can you guys post up some pics. of where you installed the horns and tank ect. ?? thanks.

gomojo31 · 09-12-2008, 08:36 AM

I HAD a nice set up, the tank and compressor I had in the tank and the horns I bolted where the winshield wiper reservoir was, I took that out BUT I had to take the horns out cus they wouldn't fit with the 22s. some put the smaller ones behind the grill

krewkut125 · 09-12-2008, 09:16 AM

All the horns were installed with me building custom brackets...

Under the drivers headlight (removed air silencer)(2 horns)

Behind the lower grille (2 horns)

Tank and compressor in spare tire well

Bigal470 · 09-12-2008, 09:20 AM

this looks like fun I might need to jump on board with it!

NOTPAID4MSRT8 · 09-12-2008, 09:32 AM

Very nice job on the mounting. Those things are huge!

TheFOSS · 09-12-2008, 12:23 PM

lol.. dangit.. now i gotta start another fund!@ lol

Icewood_Jr · 09-12-2008, 03:38 PM

anybody has pics of other locations besides down in trunk well

gstr6800 · 09-12-2008, 06:39 PM

Mike. You can get a one gallon tank that will suffice and fit with your amps. You can get the setup that has the pump mounted on it. Here are some pics of my setup:

I have a 4-horn setup that I fabricated a bracket for in order to stuff them under the bottom bumper. You can cut some aluminum L-brackets to create a "U" or "T" (depending on the type of horns used) bracket. My horn bracket allows me to fire 2 to the left and 2 to the right. Here are some pics:

My horns are flat black and well camouflaged.

The tie wraps give it away that I even have horns. The U-style bracket I made butts the horns up against one another to fire out to the sides.

After remeasuring, I have a one gallon tank that fits pretty snug.

I upgraded to a 300psi line and it works great. The line that came with the kit was terrible.

I bought a doorbell switch from Home Depot. Make sure you pull the light buld out if you get one of these switch. Here is a pic of my "kill 'em" switch.

gstr6800 · 09-12-2008, 06:41 PM

Oh yeah. I had to trim the cup cover so it did not hit the switch when I close the cover.

jayalbertcars · 09-12-2008, 06:42 PM

hello you both have done a nice job on your horn installs like bigal as said this one that i will have to do

09-12-2008, 08:33 AM	#1
1blkperl Senior Member Join Date: May 2008 Location: virginia City Highlands NV. Posts: 3,890 iTrader: (2)	Got Horns ??? I know a few of you have Air horn systems. I want too do this. Can you guys post up some pics. of where you installed the horns and tank ect. ?? thanks.
	1blkperl's Sig:BAD BOY'S BAD BOY's..... WHAT-CHA GUNNA..DO WHEN THEY FLY BUY YOU BEWARE OF THE PEARL !!

09-12-2008, 08:36 AM	#2
gomojo31 06 Dodge Van Magnum Join Date: Feb 2008 Location: Florida Posts: 2,399 iTrader: (0)	I HAD a nice set up, the tank and compressor I had in the tank and the horns I bolted where the winshield wiper reservoir was, I took that out BUT I had to take the horns out cus they wouldn't fit with the 22s. some put the smaller ones behind the grill
	gomojo31's Sig: Donations Now being accepted for Kids Beating Cancer send paypal to moparshowoff@yahoo.com

09-12-2008, 09:20 AM	#4
Bigal470 One wicked azz car! Join Date: Oct 2006 Location: Oceanside, CA Posts: 4,553 iTrader: (0)	this looks like fun I might need to jump on board with it!
	Bigal470's Sig:

09-12-2008, 09:32 AM	#5
NOTPAID4MSRT8 CMOM FOR DEC 08 Join Date: Feb 2008 Location: Salisbury, North Carolina Posts: 4,054 iTrader: (0)	Very nice job on the mounting. Those things are huge!
	NOTPAID4MSRT8's Sig:OLD GEEZERS LOVE CARS TOO!!!" 2006 Mag SRT8 (Brillant Black) SRT Floor Mats, Aluminum Pedal Kit, Interior Blue lights, HURST pistol grip shift knob with leather boot, Vinyl Lettering Kit and "SRT" front grille emblem. "HEMI 6.1" Hood decals, "ADIOS MUTHA" on the trunk lid. (Also own 19 other cars!)NOW 20 NOW 21! HEMI Registry #864 2/15/08 Jim

09-12-2008, 12:23 PM	#6
TheFOSS Senior Member Join Date: Feb 2008 Location: Tallahassee, FL Posts: 2,711 iTrader: (0)	lol.. dangit.. now i gotta start another fund!@ lol
	TheFOSS's Sig: 2005 InfernoRed R/T Mods: Engine: Mopar CAI , JBA Shorty Headers , Diablo Predator , Custom painted engine cover and pillers, BT oilcap, fuse box cover, power steeriing, and washer fluid cap Exterior: Shaved Side Moldings and Badges , Tinted Tails Interior: Red C/F Dash Kit , BT shiftknob , Modified Shifter

Remove Advertisements Sponsored Links
Supporting Members do not see these ads.

09-12-2008, 09:16 AM	#3
krewkut125 Senior Member Join Date: Sep 2007 Location: Palm Bay, Florida Posts: 3,012 iTrader: (0)	All the horns were installed with me building custom brackets... Under the drivers headlight (removed air silencer)(2 horns) Behind the lower grille (2 horns) Tank and compressor in spare tire well

09-12-2008, 03:38 PM	#7
Icewood_Jr Burn Rubber...Not Ur Soul! Join Date: Oct 2007 Location: San Diego, CA Posts: 1,376 iTrader: (0)	anybody has pics of other locations besides down in trunk well
	Icewood_Jr's Sig:*myspace.com/SD_Magnums* *myspace.com/LivinLimeLight*

09-12-2008, 06:39 PM	#8
gstr6800 From Silver 2 Sexy Bullet Join Date: Apr 2008 Location: Hotlanta Posts: 1,200 iTrader: (0)	Mike. You can get a one gallon tank that will suffice and fit with your amps. You can get the setup that has the pump mounted on it. Here are some pics of my setup: I have a 4-horn setup that I fabricated a bracket for in order to stuff them under the bottom bumper. You can cut some aluminum L-brackets to create a "U" or "T" (depending on the type of horns used) bracket. My horn bracket allows me to fire 2 to the left and 2 to the right. Here are some pics: My horns are flat black and well camouflaged. The tie wraps give it away that I even have horns. The U-style bracket I made butts the horns up against one another to fire out to the sides. After remeasuring, I have a one gallon tank that fits pretty snug. I upgraded to a 300psi line and it works great. The line that came with the kit was terrible. I bought a doorbell switch from Home Depot. Make sure you pull the light buld out if you get one of these switch. Here is a pic of my "kill 'em" switch.
	gstr6800's Sig: -Obama Sponsor and Proud American- SSCLX Club - www.southernstylecruiserslx.com My Car Domain - http://cardomain.com/ride/2527110 Street Dreams Photos - http://www.streetdreams.org/photo/sh...o=2898&cat=509 Train Horn Test - http://www.youtube.com/watch?v=VgGLn01G7ok

09-12-2008, 06:41 PM	#9
gstr6800 From Silver 2 Sexy Bullet Join Date: Apr 2008 Location: Hotlanta Posts: 1,200 iTrader: (0)	Oh yeah. I had to trim the cup cover so it did not hit the switch when I close the cover.
	gstr6800's Sig: -Obama Sponsor and Proud American- SSCLX Club - www.southernstylecruiserslx.com My Car Domain - http://cardomain.com/ride/2527110 Street Dreams Photos - http://www.streetdreams.org/photo/sh...o=2898&cat=509 Train Horn Test - http://www.youtube.com/watch?v=VgGLn01G7ok

09-12-2008, 06:42 PM	#10
jayalbertcars TOTAL MAG NUT Join Date: May 2006 Location: bel air maryland Posts: 5,440 iTrader: (0)	hello you both have done a nice job on your horn installs like bigal as said this one that i will have to do
	jayalbertcars's Sig:DODGE MAGNUM "THE POSSIBLITIES ARE ENDLESS " http://www.cardomain.com/ride/2501761 http://www.cardomain.com/ride/3216137

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode