Chrysler producing MAGNUM concepts?

The Newtron · 04-21-2007, 05:04 PM

Is Chrysler producing Magnum Prototype concepts?

Dodgeboy.net - Chrysler 300C pictures, information and specifications Scroll down.

It's gonna SUCK if they come out with a vehicle that we/I am customizing up to..

NOw anyone can go in and just buy it off the lot? Well, it was unique while it lasted.. Please forgive me if this is old news.

steve · 04-21-2007, 05:09 PM

Not quite sure what you are talking about. Dodge and Chrysler are the same company. If your talking about the 300c Touring Wagon(Magnum with a 300c Front End), that has been available in Europe for a while now.

The Newtron · 04-21-2007, 05:30 PM

Yeah I knew the 300 wagon (Magnum) has been out in Europe. But I was under the impression that they are now going to become available here. No big deal I was just about to get mine done like Hawaiihemi on this site. So if they'll be available. Do I wait and purchase a new vehicle and just hook it up? Or keep what I got and go all CUSTOM.. I'm feelin the all CUSTOM route.

steve · 04-21-2007, 06:58 PM

Where do you see that it will be coming to the states? I haven't heard any info along these lines.

lowriderman3 · 04-22-2007, 08:17 AM

I would not really call that a concept car either they are producing..Now if they were to produce the Magnum concept from 2003, that would be awesome.

Mr.Mopar · 05-08-2007, 10:00 AM

I wish someone would produce the big R/T lookin' wheels the concept had. They'd be pretty trick.

04-21-2007, 05:04 PM	#1
The Newtron Junior Member Join Date: Aug 2006 Posts: 17 iTrader: (0)	Chrysler producing MAGNUM concepts? Is Chrysler producing Magnum Prototype concepts? Dodgeboy.net - Chrysler 300C pictures, information and specifications Scroll down. It's gonna SUCK if they come out with a vehicle that we/I am customizing up to.. NOw anyone can go in and just buy it off the lot? Well, it was unique while it lasted.. Please forgive me if this is old news.

04-21-2007, 05:09 PM	#2
steve The Boss Join Date: Dec 2005 Location: Santa Barbara, CA Posts: 1,278 iTrader: (0)	Not quite sure what you are talking about. Dodge and Chrysler are the same company. If your talking about the 300c Touring Wagon(Magnum with a 300c Front End), that has been available in Europe for a while now.
	steve's Sig:Steve 06 Magnum R/T - Tinted Tailights - Universal Air Suspension 1/2" valves with 3/8" line - Factor One HID 8000K Low Beam and Foglight Kit - K&N Intake - JBA EVOL Exhaust - Removed Side mouldings and rear badges - Carriage Works Upper and Lower Billet Grille - 20% tinted front windows and top of windshield - Superchips 91 octane flash - 22" Dub Shoreline wheels with Hankook Ventus ST 265/35/22 - Hotchkis Front & Rear Sway Bars - Eibach Pro Damper kit - Pioneer Avic Z2 - 10" Dayton Subwoofer in Fiberglass enclosure - Alpine 400w Mono Amp - Silver Navigation Bezel - SRT Seats - SRT headlights with AAC Halos and Led strip http://www.myspace.com/custommagnums - send a message with your friend request http://www.myspace.com/toomeycustoms - Shop's Myspace

04-21-2007, 05:30 PM	#3
The Newtron Junior Member Join Date: Aug 2006 Posts: 17 iTrader: (0)	No big deal.. Yeah I knew the 300 wagon (Magnum) has been out in Europe. But I was under the impression that they are now going to become available here. No big deal I was just about to get mine done like Hawaiihemi on this site. So if they'll be available. Do I wait and purchase a new vehicle and just hook it up? Or keep what I got and go all CUSTOM.. I'm feelin the all CUSTOM route.

04-21-2007, 06:58 PM	#4
steve The Boss Join Date: Dec 2005 Location: Santa Barbara, CA Posts: 1,278 iTrader: (0)	Where do you see that it will be coming to the states? I haven't heard any info along these lines.
	steve's Sig:Steve 06 Magnum R/T - Tinted Tailights - Universal Air Suspension 1/2" valves with 3/8" line - Factor One HID 8000K Low Beam and Foglight Kit - K&N Intake - JBA EVOL Exhaust - Removed Side mouldings and rear badges - Carriage Works Upper and Lower Billet Grille - 20% tinted front windows and top of windshield - Superchips 91 octane flash - 22" Dub Shoreline wheels with Hankook Ventus ST 265/35/22 - Hotchkis Front & Rear Sway Bars - Eibach Pro Damper kit - Pioneer Avic Z2 - 10" Dayton Subwoofer in Fiberglass enclosure - Alpine 400w Mono Amp - Silver Navigation Bezel - SRT Seats - SRT headlights with AAC Halos and Led strip http://www.myspace.com/custommagnums - send a message with your friend request http://www.myspace.com/toomeycustoms - Shop's Myspace

04-22-2007, 08:17 AM	#5
lowriderman3 Respect My Authoritah! Join Date: Jul 2006 Location: South GA Posts: 2,793 iTrader: (3)	I would not really call that a concept car either they are producing..Now if they were to produce the Magnum concept from 2003, that would be awesome.
	lowriderman3's Sig: Check Out My Car Domain Page

Remove Advertisements Sponsored Links
Supporting Members do not see these ads.

05-08-2007, 10:00 AM	#6
Mr.Mopar Member Join Date: May 2007 Posts: 41 iTrader: (0)	I wish someone would produce the big R/T lookin' wheels the concept had. They'd be pretty trick.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode