ok if everything goes smooth on Tuesday i am getting a 300c dash all of to include the heater box, door panels, and dash wireing harness, well everything for it (like the hole car so i will be covered)
looking for thing that will need to be done because the mag is an sxt and the other is a 300c.
so i know that for some of the the thing that will have to be done by starscan.
if anyone has been apart of this mod or know of anyone that has done this mod that i can get a hold of that could help and for info would help out alot.
will this be a turn key mod or will i have to starscan the key to make the mag start. i don't think it will keep me from driving the mag till i get it starscanned but u never know.
befor i forget i have a 07 dodge magnum and the dash and door panels are out of a 05 chrysler 300c.
i am asking for help please so this mod will not be as much trial and error.
thanks for anyone that can help hellsfire
if the first one falls through, i am also working with mrhobbz to do a swap and thanks for your help and offer mrhobbz.
Last edited by hellsfire; 04-23-2011 at 06:34 PM.
Good Luck...! Take lots of pics...!
6.1 Hemi, PWR Cam, Airaid cold air intake,Tinted windows, 22" Black Verde Allusions, 6K HID's,Kenwood navigation, Chrysler 300 SRT front end conversion, BCR Coilovers, Road and Track interior,BT knobs, BT shifter, BT gear shifter plate,24"lcd, ps3, and 2 10" headrest tv's, Underglow,ColorShift halo's, SLP LM1 Exhaust, VIS Carbon Fiber Hood,Custom Door panels w/speakers Rear side pocket sub enclosures
also i am looking for someone that has access or has starscan tool for this job that i can use or meet to help get this mod done . i live just north of Cincinnati
i ask because the dealer is going to kill me to turn all the thing on that i need lol
WOW, that is very cool. I wouldn't know where to begin to do this mod! Best of luck!
2006 Magnum SRT8 "SHADOW"
2005 Red Magnum R/T "LUCKY"
2005 Blue Magnum R/T "BLUE"
2006 Chrysler 300SRT "CHEETA"
Plus have SEVERAL OTHER RIDES
"Old Geezers LOVE cars Too!!!
Hemi Registry #864 2/15/08
bump for starscan help
bump for starscan info
picked up up the car that has the dash in it.
how to have pulled out in a week or two just because of other work loads
here is some pics of what i have to come.
also i found out i have a good friend that works at a local dodge and chrysler dealership so the starscan par is a go.
after talking to him, all i need is the vin numbers off of both cars and then good to go
GL man, looks like one heck of an undertaking. Can't wait to see finished product!
I am thinking is gonna go pretty smooth for the most part there are a lot a good people that can and will help on this forum as I am doing the swap I will post a how to with a lot of pictures
It looks like it would be easier to keep the 300 and swap the body instead.....LoL
PPP stage 3 big valve heads - Howards cam 219/227 .600/.575 112 LSA (108 ICL) - PAC 1518 springs - forged pushrods - 6.1 lifters - 6.1 oil pump - 6.1 timing set - Modern Muscle stage 1+ ported 6.1 manifold& 85mm throttle body - 6.1 fuel injectors - 6.1 fuel rails - 25% UDP - Jet 180 tstat - LMI 4" true CAI - MSD "Blaster" coils - 8.2mm Taylor wires - JBA headers - JBA high flow mids - Corsa catback
Diablosport Intune - CMR by Ditos - Paramount "Dominator" 3000 stall tc & stage II valve body - Tranzformer shift kit - 226mm Getrag 3.91 LSD - BC racing coilovers - Eibach front & rear swaysBWoody endlinks - Razors Edge strut bar - Wilwood big brake kit by TCE - W6A 6 piston front calipers on 14.25" 2 piece GT rotors - Dynapro 4 piston rear calipers on 13" 2 piece GT rotorsVossen VVSCV3 & Nitto 420s - 22" x 9" w/265/35/22 & 22" x 10.5" w/295/30/22 ----- Hemi Registry #943
GL Chris looks like u got urself a nice sized project
well so far the the rear doors are done had to swap the inner door handle rod and i also switched the door unlock and lock rod just because it is silver and looks good with the car
the front door are done as well. i did the same as the rear but also switched the harness as well because the car is loaded and i wanted some of the options
also i have the 300c dash out of the 300 along with the heater box so i can have dual climate control. i hope to have the dash in tomorrow and get it to my buddy at the dealer so i can have everything turned on.
i will have some pics for all of u soon with a part 2 if anyone need help with this mod when i get everything done including some of the problems figured out i will be glad to help you all out.
until then please wish me luck