So NorCalSRT, had a question on his exhaust. That made me think then made me want to ask a question. lol Mo' Fockie!
He mentioned drone and reso's?
1) What is drone?
2) What are reso's?
I got a stock MSRT if I remove the "reso's" will this make my exhaust louder? How hard is it to do?
Robert
Present 2006 300C SRT8
Predator 91 oct Tune w/ CAI, Zoomers Exhaust, LMI "Frankentake" CAI, 6000K HIDs, 22" Vipers, BCR Coilovers more to come!
Drone is a low frequency noise (like a hum) that can be annoying as hell. The resonators are at the rear of the exhaust system just prior to the tips.
If you remove the resonators, it may make your system a bit louder but the drone will SUCK!
'05 R/T
PPP stage 3 big valve heads - Howards cam 219/227 .600/.575 112 LSA (108 ICL) - PAC 1518 springs - forged pushrods - 6.1 lifters - 6.1 oil pump - 6.1 timing set - Modern Muscle stage 1+ ported 6.1 manifold& 85mm throttle body - 6.1 fuel injectors - 6.1 fuel rails - 25% UDP - Jet 180 tstat - LMI 4" true CAI - MSD "Blaster" coils - 8.2mm Taylor wires - JBA headers - JBA high flow mids - Corsa catback
Diablosport Intune - CMR by Ditos - Paramount "Dominator" 3000 stall tc & stage II valve body - Tranzformer shift kit - 226mm Getrag 3.91 LSD - BC racing coilovers - Eibach front & rear swaysBWoody endlinks - Razors Edge strut bar - Wilwood big brake kit by TCE - W6A 6 piston front calipers on 14.25" 2 piece GT rotors - Dynapro 4 piston rear calipers on 13" 2 piece GT rotorsVossen VVSCV3 & Nitto 420s - 22" x 9" w/265/35/22 & 22" x 10.5" w/295/30/22 ----- Hemi Registry #943
Drone........ Awwwww I see! I think (LOL) I got that hum now. I was wondering WTF, Maybe the last owner removed reso's. Is it during idle? thats when I hear it?
and thanks for the link.
Thanks again Mo' Fockies!
Robert
Present 2006 300C SRT8
Predator 91 oct Tune w/ CAI, Zoomers Exhaust, LMI "Frankentake" CAI, 6000K HIDs, 22" Vipers, BCR Coilovers more to come!
The reso's "resonators" are right behind the tips. They look just like mufflers. I took the reso's off of my SRT and the drone is terrible. Some of the interior panels rattle, and it just doesn't sound good. Drone is a low, overwhelming frequency that you hear between 1900 and 2100 RPM.
Bizz----I'm in the same boat, however the resos were already gone when I bought the car. The original owner did that, as well as install Flowmasters, so the thing was just way too loud on all fronts. About 6 months ago I took it in to a local shop and had them replace the Flowmaster with a stock SRT muffler. That made a big difference, however I still have that horrible drone at the low RPMs like you do.....
Hopefully this weekend will work out and I'll get a new cat-back system. 4Wheel Parts is having their Monster sale up here in San Jose (they may be having this at all locations), where they have great deals on install, products, etc. They carry Magnaflow and Corsa, so I'm gonna see what kind of deal I can get....
Yeah I have to change my system too. I might just throw the old resos back on. Ahhh that's too quiet though. I might have to drop some money on a catback system.
Don't go with Zoomers if u want a quiet ride. Borla or Corsa is the best of both worlds!
what are the groups thoughts on the magnaflow cat-back set up?
'05 R/T
PPP stage 3 big valve heads - Howards cam 219/227 .600/.575 112 LSA (108 ICL) - PAC 1518 springs - forged pushrods - 6.1 lifters - 6.1 oil pump - 6.1 timing set - Modern Muscle stage 1+ ported 6.1 manifold& 85mm throttle body - 6.1 fuel injectors - 6.1 fuel rails - 25% UDP - Jet 180 tstat - LMI 4" true CAI - MSD "Blaster" coils - 8.2mm Taylor wires - JBA headers - JBA high flow mids - Corsa catback
Diablosport Intune - CMR by Ditos - Paramount "Dominator" 3000 stall tc & stage II valve body - Tranzformer shift kit - 226mm Getrag 3.91 LSD - BC racing coilovers - Eibach front & rear swaysBWoody endlinks - Razors Edge strut bar - Wilwood big brake kit by TCE - W6A 6 piston front calipers on 14.25" 2 piece GT rotors - Dynapro 4 piston rear calipers on 13" 2 piece GT rotorsVossen VVSCV3 & Nitto 420s - 22" x 9" w/265/35/22 & 22" x 10.5" w/295/30/22 ----- Hemi Registry #943
Safe to say that their "lifetime warranty" doesn't cover rust?