M1-Manifold

[Stone Barrington]

Can anyone tell me about these, I have seen them mentioned here but could not find much information on the net. I am looking-as always-to get some more horses out of the hemi. I heard this can or could be a nice add on with a chip to give you more ponies.

Any information would be appreciated-Thanks. Stone

[peybella]

MOPAR Performance M1 Intake Manifold
Fits 318/360 Magnum engines (5.2L & 5.9L)
Dual plane 4 BBL intake manifold
Designed to give your Magnum engine increased air flow for better efficiency and significantly increased HP and torque numbers in the low to mid RPM range. MOPAR Performance part number P5249500, Casting number P4532588

Basic Operating RPM Range3,600-8,500Engine Block StyleAftermarketIntake FinishNaturalIntake Manifold Height9.560 in.Intake MaterialAluminumIntake StyleSingle plane

[Stone Barrington]

Well as dumb as this sounds, I guess it will not work on the Hemi Magnum?

What other choices would there be, or is this not a good place to start for perfomance. Thanks Stone

[peybella]

There is a new turbo charger about to come out. I'll get the details for you. Also, I posted a write up on PCM Flash cards that give a lot of options. I think it's titled Flash Card Update on this forum site. They are about 100 bucks more than the B&G cards but from what I understand it's worth the extra due to the limiter changes and ability to adapt to specific mods performed on the car.

Cold air Intake, Upgraded exhaust and Flash cards seems to be what most folks recommend to start with.

CTS Turbocharger - I'm looking into specifics

By the way - Nothing is dumb. I'm learning as I go and it just so happens that I have been researching things you are interested in as well. The guys on this site may want to give some more detailed advice. They can also recommend specific brand names and what they have found to get better results than others. When you get that far let it be known. You will get answers.

Regards,

Greg