Need help - Eibach Springs 2006 Magnum SE - 2873.001 & 2873.002

CustomMagnums.com is the premier Dodge Magnum Forum on the internet. Registered Users do not see the above ads.


Reply to Thread
Results 1 to 4 of 4




  1. #1
    Newbie wcbb76's Avatar wcbb76 is an unknown quantity at this point
    Join Date
    May 2010
    Posts
    17

    Need help - Eibach Springs 2006 Magnum SE - 2873.001 & 2873.002

    I just bought a lightly used set of spring for my 2006 magnum se and was told they would work with my car but when i checked the numbers on the spring they don't match what i get on the Eibach website?

    what i have in hand.
    2 x 2873.001
    2 x 2873.002

    what the website shows is 2873.140.

    guess i should have checked before i bought them. does anyone know if these will still work with my se model?

    thanks!
    Reply With Quote
     
  2. CustomMagnums.com
    Advertisements
     

  3. #2
    Shaolin Ch'uan Fa Fireman2118's Avatar



    Fireman2118 knows more than the President of Chrysler! Fireman2118 knows more than the President of Chrysler! Fireman2118 knows more than the President of Chrysler! Fireman2118 knows more than the President of Chrysler! Fireman2118 knows more than the President of Chrysler! Fireman2118 knows more than the President of Chrysler! Fireman2118 knows more than the President of Chrysler! Fireman2118 knows more than the President of Chrysler! Fireman2118 knows more than the President of Chrysler! Fireman2118 knows more than the President of Chrysler! Fireman2118 knows more than the President of Chrysler!
    Join Date
    Mar 2008
    Location
    U.S.A.
    Posts
    18,714
    I believe those are "replacement" part #'s. They should be the same. (Pro kit springs) You could call Eibach to verify if you'd like at 1-800-507-2338

    '05 R/T

    PPP stage 3 big valve heads - Howards cam 219/227 .600/.575 112 LSA (108 ICL) - PAC 1518 springs - forged pushrods - 6.1 lifters - 6.1 oil pump - 6.1 timing set - Modern Muscle stage 1+ ported 6.1 manifold
    & 85mm throttle body - 6.1 fuel injectors - 6.1 fuel rails - 25% UDP - Jet 180 tstat - LMI 4" true CAI - MSD "Blaster" coils - 8.2mm Taylor wires - JBA headers - JBA high flow mids - Corsa catback - Diablosport Intune
    Paramount series 55, stage 1 transmission, "Dominator" 3000 stall tc & stage II valve body - Tranzformer shift kit - B&M Hi-Tek transmission cooler - 226mm Getrag 3.91 LSD - BC racing coilovers - Eibach front & rear sways
    BWoody endlinks - Razors Edge strut bar - Wilwood big brake kit by TCE - W6A 6 piston front calipers on 14.25" 2 piece GT rotors - Dynapro 4 piston rear calipers on 13" 2 piece GT rotors
    Trufiber Challenger A58 carbon fiber hood - Vossen VVS-CV3 & Nitto 420s - 22" x 9" w/265/35/22 & 22" x 10.5" w/295/30/22 - tuning by Ditos motors ---- Hemi Registry #943


    Reply With Quote
     
  4. #3
    Newbie wcbb76's Avatar wcbb76 is an unknown quantity at this point
    Join Date
    May 2010
    Posts
    17
    thanks.
    Reply With Quote
     
  5. #4
    Newbie wcbb76's Avatar wcbb76 is an unknown quantity at this point
    Join Date
    May 2010
    Posts
    17
    i got the springs installed yesterday, what a difference
    Attached Thumbnails Attached Thumbnails Need help - Eibach Springs 2006 Magnum SE  - 2873.001 & 2873.002-f.jpg   Need help - Eibach Springs 2006 Magnum SE  - 2873.001 & 2873.002-l.jpg   Need help - Eibach Springs 2006 Magnum SE  - 2873.001 & 2873.002-r.jpg  
    Reply With Quote
     

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts